WHERE TO USE
- Concrete
- Wood
- Terrazzo
- Marble Surfaces
- To remove glue or dried adhesives
- To remove ‘mill glaze’ from red cedar
ADVANTAGES
- Environmentally safe
- Penetrates partially into concrete or wood
- Most of the contaminants will be raised to the surface to be rinsed away
- Maintenance cleaner for concrete and wood treated with the Clearly The Best Solution series of products
- Odourless
- Easy clean-up with water and mild soap
- Prepares the concrete/wood for sealing by neutralizing the surface
- Will not alter the colour or texture of the wood/concrete
COVERAGE
- Since the degree of stain and conditions may vary widely, coverage cannot be accurately determined.
CAUTIONS
- DO NOT apply to glass, glazed surface or aluminum ~ etching will occur. Rinse thoroughly with water.
- Slightly corrosive: Avoid contact with eyes and wear rubber gloves.
- If splashed in eyes or skin, flush thoroughly with water.
- DO NOT apply to brick, exposed aggregate or tinted concrete – stains will occur.
- DO NOT apply when temperature is below 0 C.
- Material Safety Data Sheet available upon request.
APPLICATION
- Agitate container. If frozen, thaw completely and then agitate. Use as supplied. DO NOT dilute or mix.
- Apply liberally to area. Let stand for 10 to 15 minutes.
- Scrub thoroughly with stiff brush to loosen grime. Rinse well with water.
- Repeat application and steps above as necessary until all or most of the stain is removed.
- Clean equipment with water.
WARRANTY
If applied according to instructions and used as directed, Simply The Best Solution warrants that its products will perform as represented. Since methods, times and conditions of use are entirely beyond its control, this warranty is limited solely to the quality of the Company’s products and replacement of such of its products which prove to be defective.
