We believe that how we treat this planet is the hallmark of the legacy we expect to leave behind us.

CCA Sealant

WHERE TO USE
  • CCA (Chromated Copper Arsenate) Pressure Treated Wood

WHY USE
  • Encapsulates hazardous ingredients within CCA (Chromated Copper Arsenate) Pressure Treated Wood
ADVANTAGES
  • Prevents direct contact with carcinogenic ingredients of  Pressure Treated Wood (CCA)
  • Eliminates the cost of removing and replacing existing structures
  • Environmentally safe
  • Seals, waterproofs, preserves and hardens wood
  • 1 times application procedure (2 coats recommended for most surfaces)
  • Penetrates Pressure Treated Wood to form an internal seal
  • Leaves a clear, natural finish ~ retards weathering
  • Wood retains natural colour longer ~ enhances wood grain
  • Water clean-up
  • Retards seepage, dampness, moulding, fungus and warping
  • Provides a surface for better bonding of varnish, paint, stains and adhesives.
  • Extends the life of topcoat by 3 times
  • Will not leave slippery surface
  • Slows flame spread
COVERAGE
  • 175 - 225 square feet/gallon (approximately)
  • Coverage depends largely on the wood porosity, texture, moisture content and environmental conditions.  Apply product liberally and saturate all surfaces.

CAUTIONS
  • DO NOT apply to glass, glazed surfaces or aluminum as etching will occur.  In case of accidental contact, rinse thoroughly with water immediately.
  • Clearly The Best CCA Sealant is not recommended for veneers or man-made wood products.
  • DO NOT apply when temperature falls below freezing or to surfaces that are frozen.
  • Clearly The Best CCA Sealant is not meant to fill or seal visible cracks.
  • Clearly The Best CCA Sealant may deepen the colour tones of the wood.  We recommend a test application to determine degree of colour enhancement.
  • For surfaces not specified in this information, we recommend that Clearly The Best CCA Sealant be applied to a small test area first and observed for possible adverse reactions.
  • Material Safety Data Sheets available upon request.
SURFACE PREPARATION
  • New or clean surfaces:  May be applied either before or after construction.
  • Dirty surfaces:   Clean wood as well as possible using commercial cleaners or by sanding.  Clearly The Best Surface Conditioner is recommended as a highly effective cleaner for cedar as well as other types of wood.  Rinse thoroughly with water after application of Clearly The Best Surface Conditioner and follow the application instructions for the sealant.
  • Painted or sealed surfaces:  Any previous surface treatment must be removed prior to application of Clearly The Best CCA Sealant.  Remove by scraping, sanding or applying suitable caustic solvent remover.  Apply Clearly The Best Surface Conditioner to neutralize the wood and prepare the surface for sealing.  Rinse thoroughly.  Application of sealant may be applied when wood is still wet.
  • Hot/dry conditions:  Cool and moisten wood prior to application of sealant by misting with water.
  • Cracked or chipped wood:  Remove loose debris from surface.  Apply CCA Sealant to repair area only.  After 24 hours, apply filling compound to repair area and allow at least 24 hours to set.  Then mist the entire surface lightly with water and apply CCA Sealant to both original wood and filled areas.
  • Excessive moisture conditions:  In areas where moisture is a problem, make note of the size of the damp area in order to compare original conditions with after-treatment conditions.
APPLICATION

Clearly The Best CCA Sealant should be applied using sprayer equipment to ensure proper coverage of joints, laps, butts, etc...
  1. Shake the container well before using.  If the product has been frozen, thaw completely and shake well.  Use Clearly The Best CCA Sealant right out of the container.  DO NOT mix or dilute with other liquids.
  2. Spray all surfaces with water allowing full penetration before applying CCA Sealant. Water may need to be reapplied to areas that dry quickly or dispersed from areas that 'stand' longer.
  3. Apply CCA Sealant with a sprayer (20 to 30 psi).
  4. Apply the product liberally and saturate all areas.  On vertical surfaces, apply from the bottom up. Allow CCA Sealant to 'stand' for 15 minutes to 1 hour before applying a 2nd coat.  If the CCA Sealant sits on the surface in certain areas, brush it out otherwise it will form a gel on the surface. If gel forms, disperse and flush away.  The age and porosity of the wood is a major factor in the length of time required for the product to penetrate.
  5. Before applying the second coat, lightly mist the surface with water.  Apply the second coat of  CCA Sealant and let it soak in.  Two coats are recommended for all surfaces.
  6. In areas where foreign matter such as grease or oil have penetrated, CCA Sealant may force the residues to the surface.  We recommend that any residue be thoroughly cleaned away before other treatments such as paint are applied.
  7. Clearly The Best CCA Sealant penetrates the surface within 1/2 - 2 hours.  Limited foot traffic is permissible after 30 minutes. Clearly The Best CCA Sealant's full protection will be achieved within 24 hours.
  8. Clearly The Best CCA Sealant leaves a natural finish.  Surface texture will appear the same as untreated wood.
  9. Clean up equipment with mild soap and water.  Allow surfaces to dry thoroughly before applying other surface finishes such as paint, varnish, etc...
WARRANTY

If applied according to instructions and used as directed, Clearly The Best Solution guarantees that its products will perform as represented.  Since methods, times and conditions are entirely beyond its control, this warranty is limited solely to the quality of the company's products and replacement of such of its products which prove to be defective.













Subscribe to: Posts (Atom)